New technology of aluminum mould to see Jin Gang

Release time:

2018-07-05

In the world in April, the peach blossoms are in full bloom.
Entering Yangchun in April, in the "first famous mountain of law" Bao Hua mountain group, the group of Guangxi garden and University impression (Bao Hua) project department is very busy, come to visit and study, watch and collect the team in an endless stream.
In April 24th, the Jurong municipal construction commission arranged 2 bus buses, organized in Jurong all developers, supervision companies to observe and exchange; in April 25th, more than 40 students from Jurong school came to study on the site; in April 26th, Jiangsu construction worker Yunnan Yang made a special trip to the door. In the middle of May, the main leaders of Qidong municipal Party committee came to the project again. Inspection of the project department.
Whether it is civilized construction or dust control, whether it is the safety education or the quality of the project, whether it is the labor service real name management or the project site culture, every visitor who is in the scene is of great emotion, and the most exciting of all the visitors is the application of the new technology of the project.
8 18 storey, 2 25 storey total 120 thousand square meters main project, including 18 below the building 100% adopt new technology of aluminum mold. Such a large-scale use of new technology of aluminum mold is rarely seen in the construction industry at present.
Sonorous and vigorous. Kai an gold port branch has taken the lead in the use of new technology of aluminum mold. It has become the benchmark of Jiangsu Kai an and Biguiyuan Jiangsu area.
Technical excellence, a continuous capture of the first
In the dog year, the Spring Festival just passed, and the East China headquarters building in the garden was bustling with excitement.
The Jiangsu District of Biguiyuan held a summary meeting on quality monthly inspection in March 2018. There are 89 bidding projects in the Jiangsu area. At the meeting, the two stage section of the Bi Gui Garden and University impression (Bao Hua), which was built by the Jin Gang branch, won the highest honor by 91.04 points, and took the first place in third consecutive times.
This is the three consecutive gold medal since the beginning of November 2017.
It was a miracle. In December 2017, the Jin Hong Kong people won the first with a high score of 91.88 points, and received a 50 thousand yuan award. In January 2018, another 90.43 points again won the first and won a 50 thousand yuan award.
This time I won the first prize. Biguiyuan headquarters decided to add an additional bonus of 50 thousand yuan, a total reward of 100 thousand yuan. The vice president of Biguiyuan project personally presented the prizes to Chen Bihua, and highly evaluated the quality of the project in Kai an, Jiangsu.
Faced with the hard won three consecutive championships, Chen Bihua was filled with emotion. In order to get this first, every member of the project Department of Jin Gang has made a lot of effort and effort. Chen Bihua has put forward very high demands on process transfer, field coordination, quality control, safety and civilization construction management. The project department has formulated and discussed and perfected the general package management rules and regulations, extending the management to the project every time. A detail.
Chen Bihua said frankly that Hong Kong has won the first prize in a row, which relies on technological excellence. The project department does not spare no cost. The super budget input uses the aluminum alloy template system to make the concrete have good effect. It ensures the perpendicularity and flatness deviation of the wall and column to be within + 4mm.
Because of the profession, we can make a profit
At the site of Biguiyuan University (Bao Hua), an aluminum mold room is particularly noticeable. Gu Zhangquan, a young project manager, is introducing the aluminum mold technology to the group of people who are interested in visiting.
Nowadays, the technology of aluminum mold forming in Jin Gang has reached a high standard of "Siping four", with a good rate of over 95%. This process makes the colleagues look at each other. Others use aluminum mold to lose money, while Jin Hong people can make profits accordingly. Such results have been admired by their peers.
Chen Bihua said proudly, because we are more professional than others.
Where is this secret? Chen Bihua pinched the way -
From the technological point of view, the aluminum alloy formwork system can avoid the plastering leveling process, and eliminate the common diseases of the wall plastering and crack in the interior wall from the quality. From the construction cost analysis, it saves the raw material consumption of the cement and sand and the plastering, at the same time reduces the use time and part of the labor cost of the turnover material. . The concrete structure surface achieves the clear water effect, may enter the decoration stage directly.
Secondly, the new technology of aluminum mold is conducive to the civilized construction of the project. When the aluminum mold is constructed, the garbage is few and the floor is clean and tidy. In addition, it is beneficial to speed up the construction progress, save time and reduce the workload of the tower crane. The plate plate of the beam and the floor plate all adopt the whole installation; the aluminum alloy template support system adopts the rapid dismantling process; the transfer of the upper and lower layers of the formwork and its supporting material is used artificially to reduce the workload of the tower crane and can be effectively controlled. Unsafe factors in mechanical operation.
Chen Bihua introduced that from this year, bassia garden group began to launch 140, 145, 160, 95 and other fixed units, which is in great favor of the repeated continuous use of aluminum mold, thus greatly reducing the cost of the use of aluminum mold.
Not only that, Chen Bihua is also good at adjusting the process flow, and reusing aluminum mold between buildings.
In short, as the Hong Kong people start from various aspects, their application of aluminum mold technology reaches professional level, and even tens of billions of dollars per square meter can be achieved.
Ken wants to do something new and try new things
"Though the road is far away, it will come."
Chen Bihua, the 53 year old Golden Port Branch head, likes this sentence very much. He lived in Xiangyang village near the sea town of Qidong. He came from a scholarly family. He worked as a soldier for 2 years when he was young, and worked as a post and Telecommunications worker for 8 years.

New technology of aluminum mould to see Jin Gang

Merck Life Science Nantong Phase II Solvent Production Project - Group Comprehensive Inspection

null

Recommended news

2026-06-25

The Kuaike Haofudun project, undertaken by the Group, has officially entered production, and General Manager Zhang Jian was invited to attend the opening ceremony.

On the morning of June 25, the grand opening ceremony of Quake Haofudun Materials Technology (Suzhou) Co., Ltd. was held in the Zhangjiagang Free Trade Zone. Zhang Jian, General Manager of the Group, along with Deputy General Manager Shi Saicai and other invited guests, attended the event and jointly witnessed this significant milestone marking the project’s entry into production.

2026-06-24

The Group achieved excellent results in the preliminary round of the province-wide construction safety production knowledge competition.

Recently, the preliminary-round results of the province-wide construction‑site safety production knowledge competition were officially announced. The Group achieved an outstanding team performance, with six participants ranking in the top ten, placing first among all construction enterprises in the province.

2026-06-22

The Group’s Roche Pharmaceutical project employs air‑suspended air cushions to achieve non‑destructive construction.

In mid-June, the Roche Pharmaceuticals project, constructed by the Group’s Maosheng International Engineering Branch, successfully completed the indoor relocation of three 13-ton heavy-duty pieces of equipment within a high‑standard epoxy flooring area, utilizing an air‑suspension cushion‑lifting technique.

2026-06-10

Carrying forward the glory of military service, we uphold our spirit of dedication to peace and security.

On June 2, the “Carrying Forward the Glory of Military Service, Ensuring the Well-being of Veteran Soldiers” Care Foundation was officially established at the Qidong Municipal Bureau of Veterans Affairs and the Municipal Charity Federation, under the leadership of Gong Shancong, Deputy General Manager of the Group. The foundation aims to “show care for veterans, alleviate their difficulties, safeguard their health and well-being, and spread warmth throughout society.”

2026-06-05

The Group’s Roche Pharmaceutical Project has been awarded the One-Million-Safety-Hours Award.

On June 5, the Roche (Shanghai) Biopharmaceutical Production Base Project (Phase I) held a ceremony to celebrate reaching one million safe man-hours, and the Group was presented with a commemorative trophy.

2026-05-26

The Group convened a special meeting of the dedicated task force for major project services.

On the afternoon of May 25, the Group convened a special working meeting on major project services in the 16th-floor conference room, with senior management and all members of the Major Project Management Department in attendance. The meeting was chaired by Zhang Jian, General Manager of the Group.