"Three Keys" for Safety Management of Tower Crane


"Three Keys" for Safety Management of Tower Crane

As one of the most popular and indispensable lifting equipment on the construction site, tower crane can lift steel bars, steel pipes, fabricated floor slabs, small equipment, various components, etc. However, due to the complex working environment of tower crane equipment, insufficient intelligent monitoring means, uneven quality of tower cranes, lack of strength of the leasing company's maintenance team and a series of problems, there are major potential safety hazards, causing the tower crane to overturn in recent years High falling and other safety accidents occur frequently.

The Security Department of the Group found some similar potential safety hazards in our project through major inspection, flight inspection and some regional safety inspections. Therefore, share some "tips" from excellent project departments and peers, and pay attention to strengthening safety measures and reference of safety protection devices in the future use of tower crane leasing.

First, strengthen the installation of tower crane fall arresters. The hot weather in summer is easy to cause heatstroke, and the operators may fall down when climbing. The Group has always required that the direct climbing tower cranes of the branches must be equipped with fall arresters, and double fall arresters can be provided if possible for the use of tower crane drivers, inspectors, and maintenance personnel, or directly use the Teng'an Leasing Company recommended by the Group. The tower cranes they purchase are all new models of Zoomlion to achieve intrinsic safety. The built-in rotary climbing and descending stairs do not pose a risk of falling from height, and fall arresters are not required. In Qidong Experimental Primary School, Ziwei Village 3 and Hongshi Project, Teng'an Tower Crane has been used and achieved good results.

Secondly, pay attention to the daily safety inspection of the standard section bolts of the tower crane. The tower crane has been used in the open air for a long time, and the working state of slewing, hoisting and unloading of the tower crane. The high-strength bolts are inevitably loose and fall off because they are subject to irregular shear stress, normal stress and wind load for a long time. If they are not found in time, the accidents will be unimaginable.

The commonly used inspection method is manual visual inspection, which is time-consuming and laborious, and there is a risk of falling when climbing up and down, and there may be omissions in the inspection process, which cannot be comprehensive.

The tower cranes of the project of Jingang Branch are all equipped with warning nuts. Once the high-strength nuts are loosened, the pressure sensor of the warning nuts will be triggered and an alarm light will be sent out. When tower crane drivers go to and from work and management personnel are patrolling, they can directly determine whether the nuts are loose, which can directly eliminate potential safety hazards. It greatly reduces the time and frequency of equipment inspection and maintenance personnel working at heights, and further guarantees the personal safety of operators.

Finally, the tower crane hook visualization system can be configured. This can solve the problems of super high lifting distance and blind area of tower crane. The driver can clearly see the real-time status of the hook, whether the materials are fastened and the surrounding area through the display screen in the cab tens of meters high. Whether there are people and obstacles during hoisting, and then hoist again to effectively ensure the safety of tower crane operation.

The purchase cost of fall arresters and warning nuts is not high, and the hook visualization device can also be purchased if conditions permit. As long as we are good at grasping the "three keys" of tower crane safety management, through the use of these safety protection measures and safety protection devices, we may greatly reduce major potential safety hazards and improve the economic benefits of the enterprise. (Qiu Jinkun)

Recommended news


The Group Company has completed the renewal of its Class B boiler installation license.

On November 16, with approval from the Jiangsu Provincial Administration for Market Regulation, the Group successfully completed the renewal of its Class B boiler installation license, bearing certificate number TS3132068-2031, valid until January 7, 2031.


Integrating into Six Networks to Build New Infrastructure | The Group was invited to attend the Jiangsu Province Conference on Promoting Construction Enterprises’ Participation in the Investment, Construction, and Operation of the “Six Networks” and on Government-Bank-Enterprise Coordination

On November 12, Jiangsu Province hosted a conference in Nanjing to promote the participation of construction enterprises in the investment, construction, and operation of the “Six Networks” initiative, as well as to facilitate connections among government, banks, and enterprises. Ma Shiguang, Vice Governor of Jiangsu Province, attended the meeting and delivered a speech. Tan Ying, Director of the Jiangsu Provincial Department of Housing and Urban–Rural Development, presented an overview of the development of Jiangsu’s construction industry and explained relevant policies. Zhang Jian, General Manager of the Group, also took part in the event.


The Group Company has successfully completed the administrative licensing approval for the comprehensive working hour calculation system.

In early November, the Group successfully passed the on-site verification for the administrative license renewal of its biennial comprehensive working-hour system, completing the new approval process. This has further standardized workforce management, reinforced compliance safeguards, balanced corporate development with employee rights, and strengthened employment security to support the Group’s resilient and sustainable growth.


Qidong City Held the Second Session of Its 2026 Entrepreneurs’ Symposium; Chairman Yin Weidong Attended and Delivered a Speech

On the afternoon of November 2, Qidong City held the second session of its 2026 Entrepreneurs’ Symposium. Cao Yanhui, Secretary of the Municipal Party Committee, attended and addressed the meeting; Qin Guangrong, Deputy Secretary of the Municipal Party Committee and Mayor, presided over the event; and municipal leaders Wang Yubing, Guo Jian, Song Haihua, among others, also took part.


The Group has been awarded two provincial-level construction methods in the Tibet Autonomous Region.

At the end of October, the Construction Industry Association of the Tibet Autonomous Region announced the list of regional-level construction methods for 2026. Two methods submitted by the Group—“Construction Method for Temporary Site Drainage Channels Using Prefabricated Polymer Materials” and “Spatial Dimension Measurement Method for Unit Acceptance Based on Total Stations”—were successfully selected.


Two projects of the Group have been awarded the Urumqi and Bazhou Quality Engineering Awards.

In mid-October, two Xinjiang projects under the Group were successively awarded the “2026 Urumqi Quality Project” and the “2026 Bazhou Quality Project,” reflecting the high recognition from the local industry authorities in both regions for the projects’ construction quality, safety management, and civilized site practices.